Search:     Advanced search
Recent Articles
 
document KB0158 Update MMS Firmware via Dealer Zone
The Autonomic Dealerzone is a tool which allows management of your Autonomic devices in the field.  The management feature set includes updating MMS firmware remotely, which can be done for a single or a group of units simultaneously. These instructions assume you are a...
18 Apr, 2018 Comments: 0
document KB0161 Mirage Amplifier Doorbell Preset Wiring
Both the M-400 and M-800 series amplifiers offer a doorbell feature. With this feature a preset doorbell sound can be played out of a select group of zones or all the zones in the system by triggered contact closure. The type of doorbell sound, volume level and zones will be configured under the...
17 Apr, 2018 Comments: 0
document KB0169 Intermittent volume and transport control problems using Airplay Pakedge netowrk
It has been reported that some of our customers using a Pakedge networking equipment have experienced some problems with volume or transport controls (Play, Pause etc.) on the iOS device while Airplaying to the Mirage Media Server. There maybe some adjustments needed on your...
17 Apr, 2018 Comments: 0
document KB0193 Accessing Dealerzone
Dealer Zone web portal enables integrators to remotely manage and monitor supported Autonomic devices.  This includes allowing integrators to update devices to the latest firmware, make configuration changes, submit logs, etc.  At a glance, you can view devices across all your clients,...
04 Apr, 2017
document KB0128 MMS - Firmware update
In order to apply a Firmware update (including a hotfix) to the MMS, you may either (1) Log in to the DealerZone and search for your device.  If online and running a supported firmware, you will be able to update the firmware online.  Expand the device arrow and select...
29 Mar, 2017
document KB0192 MMS-1e Front Panel Status Lights
MMS-1e units produced after 2016, include a light on the front of the chassis to indicate status.   Status lights and their specific meanings are as follows: Blue Solid Power on Amber Solid No Ethernet cable...
24 Mar, 2017 Comments: 0
document KB0164 Using the MMS in Low Bandwidth/High Latency Environments
Using the MMS in Low Bandwidth / High Latency Environments Updated: 2015-09-23 Category: Streaming Services Products: Mirage Media Servers Problem Description An MMS installed in environments with low bandwidth and/or high latency environments (such as a yacht)...
15 Mar, 2017 Comments: 0
document KB0125 MMS - Firmware update via USB
If an internet connection is not available to the MMS, this process can be used to update the firmware of any Mirage Media Server using a USB flash drive. 1. Download and save this...
15 Mar, 2017 Comments: 0
document KB0190 Create a Playlist on the MMS Manually
The playlist will need to be placed in the same folder as the content it is referencing. You will be required to have the following:  A program to create playlist (e.g. VLC) An editor to edit the playlist (e.g. notepad++)  Open the folder that contains all the...
08 Mar, 2017 Comments: 0
document KB0191 How to Update E-series Amplifier Firmware (M-801e, M-401e, M-120e Amplifiers)
Updated: 03/01/2017 Category: Mirage Amplifiers Products: Mirage M-801e, M-401e, M-120e Use the following procedure to update the firmware on your Mirage Audio System amplifiers - M-801e, M-401e, M-120e.  Your settings will NOT be erased.  Please leave your amps...
01 Mar, 2017 Comments: 0
document KB0078 How to Update Amplifier Firmware (M800, M400 Amplifiers)
Updated: 06/22/2015 Category: Mirage Amplifiers Products: Mirage M800, M400 Use the following procedure to update the firmware on your Mirage Audio System amplifiers - M800, M400.  Your settings will NOT be erased.  Please leave your amps fully attached and...
01 Mar, 2017 Comments: 0
document KB0186 Network and Port Requirements for eSeries MAS
Required Settings for eSeries Mirage Audio System to enable communication between eSeries servers and eSeries amplifiers. Multicast (UDP) communication is required between servers and amplifiers on 239.195.188.235 The necessary communication port for this UPD traffic is defined as...
10 Feb, 2017 Comments: 0
document KB0097 Expanding MMS Storage Capacity/USB Storage
You can expand the storage capacity of an MMS by connecting a FAT32 formatted external hard drive via USB. The external hard drive can be no larger than 2TB. Connect the external drive and then navigate to the server's config page under the contents tab.  There are...
07 Feb, 2017 Comments: 0
document KB0071 List of Supported USB DACs
The following is a list of DACs which we believe (but do not guarantee) will operate with current MMS systems.  Many DACs which are not on this list will likely also work, especially if they are Plug and Play DACs (no special software driver required). Supported...
18 Jan, 2017 Comments: 0
document KB0189 MRAD Communications on MAS
MRAD Communications on MAS Overview When a Mirage Media Streamer (MMS) and a Mirage Amplifier or Mirage Amplifiers are paired together, they become a Mirage Audio System (MAS). As with MMS control, the API is fairly simple. We strongly recommend using XML mode for all list browsing. With...
05 Jan, 2017 Comments: 0
document KB0188 Configuring for Wireless Networking mode
Configuring for Wireless Networking mode (Wifi) Updated: 12/16/2016 Category: Mirage Media Server, eSeries Products: Mirage Media Servers MMS-1e  Description This article describes how to enter or exit Wireless Networking mode and issues that may be...
16 Dec, 2016 Comments: 0
document KB0076 What are the Product Shipping Weights and Dimensions?
Autonomic Controls Product Shipping Info Product Weight (lbs) Length (inches) Width (inches) Height (inches) MMS-5A 13.4 15" ...
14 Dec, 2016 Comments: 0
document KB0187 Factory Resetting Mirage Amplifiers
Factory Resetting Mirage Amplifiers Updated: 2016-12-09 Category: Mirage Amplifiers Products: M400, M800, M801e, M401e, M120e  Problem Description I need to factory reset my amplifier. Resolution There are two ways to factory reset a Mirage Amplifier. If...
09 Dec, 2016 Comments: 0
document KB0174 Programmatically Using Presets with Crestron Smart Graphics
There are 3 main ways to save and recall presets with the Crestron Smart Graphics using the Autonomic MMS device symbol: 1) Using the MMS control protocol When sending MMS protocol commands within the Autonomic MMS device symbol in Crestron, all protocol commands will need to be prefixed...
14 Nov, 2016 Comments: 0
document KB0184 Set SiriusXM BitRate
Sets the bitrate for the SiriusXM streaming service.  The default bitrate is 256kbps, however, it may be necessary in high latency and/or low bandwidth scenarios to reduce the bitrate used by the MMS for streaming SiriusXM music.   Set siriusxm2 bitrate 256 (Factory Default) Set...
31 Oct, 2016 Comments: 0
document KB0181 How to Configure a NAS Drive with the MMS
To configure a NAS drive on the MMS, you will first need to know: The NAS network path Username, if one is configured Password, if one is configured. Next, open up a web browser on a computer that's on the same network as the MMS and enter the following in the address bar:...
31 Oct, 2016 Comments: 0
document KB0185 Allowing the Synchronization Client to see the iTunes Library
Allowing the Synchronization Client to see the iTunes Library Updated: 2016-09-23 Category: Sync Tools Products: Synchronization Clients Problem Description The synchronization client cannot see the iTunes library. Possible Cause #1 and...
23 Sep, 2016 Comments: 0
document KB0173 Supported Streaming Services
Follow the link below to see the currently supported streaming services and their features http://www.autonomic-controls.com/documents/MAS/Mirage_Streaming_Services.pdf
22 Sep, 2016 Comments: 0
document KB0183 MMS-5A not shutting down or rebooting correctly
If you experiance a condition on an MMS-5A where the unit is not shutting down or rebooting correctly, There may be a small change required to the Bois settings. This only affects a few MMS-5As with the serial numbers in the following format :313-10-XXXXXXXXXX and 313-10-XXXXXXXXXX. If you...
07 Jul, 2016 Comments: 0
document KB0182 5.3 Firmware Release Notes
Lutron ·         Lutron: RadioRA Initial Release ·         Lutron: Various Homeworks improvements iHeartRadio ·         iHeartRadio: Initial Release Crestron ·...
27 Jun, 2016 Comments: 0