Search:     Advanced search

Renaming Outputs

Article ID: 29
Last updated: 04 Nov, 2013
Revision: 1
Add comment
Views: 1036
Comments: 0
Posted: 04 Nov, 2013
by LaBollita J.
Updated: 04 Nov, 2013
by LaBollita J.

Updated: 11/4/2013
Category: Mirage Media Server
Products: Mirage Media Servers MMS-2, MMS-2A, MMS-5, MMS-5A 

The Source Settings tab allows you to configure audio settings and system outputs on the MMS.
 

The Connections section allows you to enable or disable each output, rename them, configure

maximum sampling rate and bit depth (digital outputs only) and set each to variable or fixed

gain output for pass-through control of volume, mute and zone power on the amp from the

MMS OSD and web interface.
 

You can rename the source outputs by double clicking on their name in the web browser. The

new name will be used on our web control interface and mobile applications.
 

For control system integrations, the server will always respond correctly to commands issued

using the default output names, and will also respond commands issued using the new names.

For this reason, you should avoid renaming the outputs to any of the other default names (ie,

Main, Player_A, etc.)

Also listed in
folder Mirage Media Server

Prev   Next
KB0028 Disabling Unused Outputs     KB0027 Fixed vs. Variable Gain