Search:     Advanced search

Disabling Unused Outputs

Article ID: 28
Last updated: 04 Nov, 2013
Revision: 3
Add comment
Views: 1028
Comments: 0
Posted: 04 Nov, 2013
by LaBollita J.
Updated: 04 Nov, 2013
by LaBollita J.

Updated: 11/4/2013
Category: Mirage Media Server
Products: Mirage Media Servers MMS-2, MMS-2A, MMS-5, MMS-5A 

The Source Settings tab allows you to configure audio settings and system outputs on the MMS.
 

The Connections section allows you to enable or disable each output, rename them, configure

maximum sampling rate and bit depth (digital outputs only) and set each to variable or fixed

gain output for pass-through control of volume, mute and zone power on the amp from the

MMS OSD and web interface.
 

If you will not be using all of the available outputs, set the option to Disabled. This will keep

those outputs from consuming system and power resources, and will remove these items from

the lists.

Also listed in
folder Mirage Media Server

Prev   Next
KB0030 Bit Depth and Sample Rate Resolution     KB0029 Renaming Outputs