Search:     Advanced search

Wired Ethernet Settings

Article ID: 20
Last updated: 01 Nov, 2013
Revision: 1
Add comment
Views: 1290
Comments: 0
Posted: 01 Nov, 2013
by LaBollita J.
Updated: 01 Nov, 2013
by LaBollita J.

Updated: 11/1/2013
Category: Mirage Media Server
Products: Mirage Media Servers MMS-2, MMS-2A, MMS-5, MMS-5A 

The Server Settings tab allows you to configure the following options.

Wired Ethernet Settings

In this section, you can configure your servers network connection to automatically use a

network DHCP server to obtain it’s IP address and network settings, or you can manually

specify a static IP address and network settings to use.

If you choose to use Manual Configuration be sure to enter the correct settings for IP Address,

Subnet Mask, Gateway, and DNS 1 & 2. If you are unsure how to configure these settings it

would be best to leave your connection set to Autonomic (DHCP) or contact your network


WARNING: Setting these values incorrectly can prevent the MMS from connecting to your network, and

could make the server unreachable. If this happens, there is a utility available at http://www. which can help you recover.

Also listed in
folder Mirage Media Server

Prev   Next
KB0021 Logging     KB0019 Setting Date and Time