Search:     Advanced search

How to Update E-series Amplifier Firmware (M-801e, M-401e, M-120e Amplifiers)

Article ID: 191
Last updated: 01 Mar, 2017
Revision: 5
Add comment
Views: 533
Comments: 0
Posted: 01 Mar, 2017
by Narciso S.
Updated: 01 Mar, 2017
by Narciso S.

Updated: 03/01/2017
Category: Mirage Amplifiers
Products: Mirage M-801e, M-401e, M-120e

Use the following procedure to update the firmware on your Mirage Audio System amplifiers - M-801e, M-401e, M-120e.  Your settings will NOT be erased.  Please leave your amps fully attached and connected to the network.  

Requirement: A computer with a Telnet client installed. 

1. Connect to the amplifier via telnet over port 17056.  

TELNET <amp ip> 17056

2. Run the appropriate update commands, pertaining to the model you are updating.

INSTALL_BUNDLE updates.autonomic-controls.com/amp/Autonomic_M801e_release.bun

INSTALL_BUNDLE updates.autonomic-controls.com/amp/Autonomic_M401e_release.bun

INSTALL_BUNDLE updates.autonomic-controls.com/amp/Autonomic_M120e_release.bun

DO NOT POWER DOWN THE AMPLIFIER DURING THE UPDATE.  

Reported progress should normally be displayed during the update process.  When complete, the amplifier should reboot and the telnet client will close automatically.

We recommend all amplifiers in a system to be running the same firmware.

Also listed in
folder eSeries

Prev   Next
KB0161 Mirage Amplifier Doorbell Preset Wiring     KB0078 How to Update Amplifier Firmware (M800, M400 Amplifiers)