Search:     Advanced search

MMS - Firmware update via USB

Article ID: 125
Last updated: 15 Mar, 2017
Revision: 4
Add comment
Views: 1939
Comments: 0
Posted: 14 Nov, 2014
by -- .
Updated: 15 Mar, 2017
by Narciso S.

If an internet connection is not available to the MMS, this process can be used to update the firmware of any Mirage Media Server using a USB flash drive.

2. Place the file in the root directory of a USB thumb drive.  The thumb drive MUST be formatted with the FAT file system.
3. Insert the USB thumb drive into a free USB port of the MMS.
4. The MMS will install the application.
5. After the server processes the update, it will restart after several minutes.
6. Remove the thumb drive immediately on restart
-------------------------------------------------------------------
To update the server to a hotfix, please use the following path instead of the path indicated above http://autonomiccontrols.com/documents/dms50/Mirage/Hotfix/standalonesetup.signed.exe​

Also listed in
folder Support

Prev   Next
KB0164 Using the MMS in Low Bandwidth/High Latency Environments     KB0190 Create a Playlist on the MMS Manually