Search:     Advanced search

MMS - Crestron - On Screen Display Navigation Commands

Article ID: 120
Last updated: 26 Dec, 2014
Revision: 2
Add comment
Views: 1508
Comments: 0
Posted: 14 Nov, 2014
by -- .
Updated: 26 Dec, 2014
by Simon J.

To use onscreen navigation on an MMS, you will first need to set the instance that is being controlled, using the command SetOSDInstance followed by the instance name (Main, Player_A, Player_B, Player_C, or Player_D)

For Example:

SetOSDInstance Main

SetOSDInstance Player_B


 Next, you will need the command SendRemote <direction> where <direction> is up, down, left, right, or ok.

For example:

SendRemote Up

SendRemote OK


For press and hold on the d-pad commands, you can append the command with the suffix "_press", followed by "release". This will cause the OSD to scroll quickly after 1/2 second.

For Example:

SendRemote down_press

The scroll will be cancelled by sending a release command, or any other navigation command:

SendRemote release -or- SendRemote up_press

If using Crestron, send all commands through the TX$ on the MMS modules' TCP/IP client. Alternatively, send these commands directly to port 5004 on the server.

Also listed in
folder Support

Prev   Next
KB0117 MMS - Control Protocol - Browse by letter     KB0121 MMS - Crestron - Search by title