Search:     Advanced search
document KB0169 Intermittent volume and transport control problems using Airplay Pakedge netowrk
It has been reported that some of our customers using a Pakedge networking equipment have experienced some problems with volume or transport controls (Play, Pause etc.) on the iOS device while Airplaying to the Mirage Media Server. There maybe some adjustments needed on your...
17 Apr, 2018 Comments: 0
document KB0157 Mirage 5.2 Firmware - Release Notes
Murfie ·         Murfie: Initial Release Crestron ·         Crestron: Changes for Smart Graphics 3.0 ·         Crestron: Changed...
26 Jun, 2015 Comments: 0
document KB0083 Airplay Tips
High quality lossless audio transfer requires a network with sufficient bandwidth and low latency.  In order to have the best possible experience using the Airplay feature, a well performing Wi-Fi network is essential.   If the response times on the network are...
17 Nov, 2014 Comments: 0
document KB0082 Airplay Across VLAN's and Subnets
Special settings may need to be added to your router to allow Airplay discovery and streaming across different VLAN's and subnets.  The routes listed below need to be configured: From WiFi (iOS) to the LAN (MMS) Destination port TCP port 700 UDP ports 1 through 65535 ...
17 Nov, 2014 Comments: 0
document KB0144 MMS - AirPlay - How To Configure
The MMS-2, MMS-2A, MMS-5 and MMS-5A support AirPlay. For the best experience, we recommend updating to the latest available firmware on your MMS.  You can update the firmware either through the server's configuration page or via the DealerZone.   To enable Airplay: ...
17 Nov, 2014 Comments: 0